Fiberlogy PLA MINERAL 1.75mm -PERFECT IN EVERY DETAIL

Details do matter. Especially when you need to print very precise models or sculptures. Then you will find PLA MINERALvery helpful. It is a material that resembles plaster casting. This distinctive feature, combined with the precision of the prints, makes it possible to use it in architectural and artistic studios, detailed prototyping and modelling.
No shape poses a challenge for PLA MINERAL. Its properties allow for accurate replication of even the tiniest elements. Test it for yourself and you will see every detail.

APPLICATION:
* MODELS: buildings, structures, land development projects, interiors
* DECORATIONS: statues, sculptures, reliefs
* MODELING: small elements requiring high precision
* PROTOTYPES: concept models, small parts

PROPERTIES:
* satin surface thanks to the addition of chalk
* very good printing precision

DIAMETER
1.75 MM

DIAMETER TOL
+/- 0.02 mm

OVAL TOL
+ 0.01 mm

PRINTING TEMP
190-210°C

TABLE TEMP
50-70°C

HOW TO PRINT?
THE FOLLOWING PARAMETERS ARE ONLY SUGGESTED PRINT SETTINGS FOR THIS MATERIAL. TO ENSURE THE BEST PRINT QUALITY, IT IS NECESSARY TO CHOOSE THE APPROPRIATE SETTINGS FOR A SPECIFIC PRINTER AND PRINTING CONDITIONS.

NOZZLE TEMPERATURE
190-210°C

BED TEMPERATURE
50-70°C

CLOSED CHAMBER
not required

FAN
75-100%

FLOWRATE
90-100%

PRINTING SPEED
35-60 mm/s

SURFACE
glass, masking tape

RETRACTION (DIRECT)
2-3 mm

RETRACTION (BOWDEN)
4-6 mm

RETRACTION SPEED
20-45 mm/s



===Authorozed Fiberlogy Reseller Malaysia===