Fiberlogy FIBERFLEX 30D 1.75mm -BE MORE FLEXIBLE

Just another option for enthusiast of printing on rubber-like materials. Our FIBERFLEX 30D is characterized by reduced hardness up to 30D on the Shore scale, very good flexibility and higher impact strength.

The material is recommended especially for printing tires, seals, belts and all kinds of elastic elements.

APPLICATIONS:
* RUBBER ELEMENTS OF MACHINES: gaskets, elements that are frequently bent
* GADGETS OR THEIR ELEMENTS: phone sleeves and cases, watch-, pulse counter-, pedometer straps
* LINKING ELEMENTS: flexible hinges
* TOYS OR THEIR ELEMENTS: tires, rubber figures
* JEWELLERY: bands, bracelets

PROPERTIES:
* 30D Shore hardness
* high impact resistance in low temperatures
* very good thermal, chemical and abrasion resistance

DIAMETER
1.75 MM

DIAMETER TOL
+/- 0.05 mm

OVAL TOL
+ 0.03 mm

PRINTING TEMP
200-220°C

TABLE TEMP
50-70°C

HOW TO PRINT?
The following parameters are only suggested print settings for this material. To ensure the best print quality, it is necessary to choose the appropriate settings for a specific printer and printing conditions.

NOZZLE TEMPERATURE
200-220°C

BED TEMPERATURE
50-70°C

CLOSED CHAMBER
not required

FAN
50-75%

FLOWRATE
105-110%

PRINTING SPEED
< 35 mm/s

SURFACE
glass, masking tape

RETRACTION (DIRECT)
1-2 mm

RETRACTION SPEED
10-30 mm/s

NOTES
To remove the print easier, it is recommended to heat the bed to 110°C



===Authorozed Fiberlogy Reseller Malaysia===