• 1b06436882f03a19c66bfe330aae7c0a


3DXTECH ThermaX™ PEKK-C 1.75mm/500g

Regular price
RM 1,921.25
Sale price
RM 1,921.25
Regular price
RM 3,202.08
TDS & SDS Available
Member Discount
Business Bulk Purchase
📌Please contact us for stock availability (latest spool weight and colour)
📌Price listed are estimated and in rough only, please contact us to request for quotation (RFQ).
📌A discounted price will be offered for business / company / bulk purchase.
📌Full Description including product certificates (TDS/SDS/ROHS) & product care instruction refer to our officials websites

ThermaX™ PEKK-C 3D Printing Filament
ThermaX™ PEKK-C (PolyEtherKetoneKetone) is made using Arkema Kepstan® PEKK and is one of the highest-performance polymers in world. A leading material in the PAEK family, PEKK has exceptionally good mechanical, thermal, and chemical resistance properties. It is also not only substantially easier to print than PEEK, it’s one of the easiest ultra-polymers to 3D print period.

👉Benefits of ThermaX™ PEKK-C Include:
Higher thermal properties than available in PEKK-A
Substantially easier to 3D print than PEEK
Wide processing window from 345-375°C
CUT of 260°C, Tg of 162°C, and a Tm of 335°C
Inherently flame resistant (UL94 V-0)
Low smoke generation
Outstanding mechanical, thermal, and chemical resistance

👉Compare Our PEKK-C to Stratasys® Antero™ PEKK
Both use real PEKK from Arkema as the base resin component
ThermaX™ PEKK-C is a lower cost and specially designed for use on lower-pricepoint, open-material 3D printers
Stratasys® Antero™ is more expensive and requires users to purchase an extensive Fortus® system and a high-priced user license

👉Annealing 3D Printed Parts:
Parts printed with PEKK may be annealed after printing to ramp-up the crystallinity in the resin. This will maximize mechanical, thermal, and chemical resistance properties. Printed parts will be transparent golden in color and then turn an opaque tan color once annealed. If you do not anneal the PEKK parts, then the maximum use temperature is 150°C. If you do anneal, the maximum use temperature is 260°C. You can choose which route to go depending on the needs of your part.
Step 1: Place your part in an oven and raise the temperature to 160°C, allow to remain at that temperature for 30 minutes.
Step 2: Raise the oven temperature to 200°C and allow the part to remain their until it turns a uniform tan color. Timing will depend on the temperature uniformity, the air circulation inside the oven, and part surface area and size. Allow your part to cool prior to handling.

👉Filament Specifications:
1.75mm and 2.85mm +/- 0.05mm in diameter

👉Recommended Print Settings:
Extruder: 345-375°C
Bed Temp: 120-140°C
Other: 20-50mm/s print speed as a starting point
Bed Prep: Nano Polymer Adhesive and 3DXTECH Polyimide Tape gives us the best results
Heated Chamber: Recommended, a chamber helps reduce warping and improves layer adhesion. Heat it to 70-150°C if at all possible
Supports: ThermaX™ HTS High-Temp Support is designed to work with complex, high-temp materials
Drying Instructions: 120°C for 4 hours