3DXTECH ThermaX™ HTS (High Temp Support) 2.85mm/500g

【🔴NOTICES BEFORE PURCHASE🔴】
📌Please contact us for stock availability (latest spool weight and colour)
📌Price listed are estimated and in rough only, please contact us to request for quotation (RFQ).
📌A discounted price will be offered for business / company / bulk purchase.
📌Full Description including product certificates (TDS/SDS/ROHS) & product care instruction refer to our officials websites

👉Thermax™ HTS2 High-Temp Support Filament [9085 Break Away Support]
Our break away high-temp support filament is ideal for use in dual extruder 3D printers designed to print high-temp materials.

HTS is the premium support for our high-temp products, unlike most support filaments, which are not designed to withstand the heat required to print the top-end of performance materials.

👉Works ideal with the following ThermaX™ materials:
PEKK [PolyEtherKetoneKetone]
PEEK [PolyEtherEtherKetone]
PEI made using ULTEM™
PPSU [Polyphenyl Sulfone]
PSU [Polysulfone]
PPS [Polyphenylene Sulfide]

👉Support Removal:
This is break-away support and does not dissolve.
High-Temp support is best removed while printed part is still warm.
If the finished printed part cools completely and the support removal gets too difficult, you can re-warm the part in the printer chamber or an oven not exceeding the Tg of the model material you are printing with.

👉Filament Specifications:
1.75mm and 2.85mm +/- 0.05mm in diameter

👉Recommended Print Settings:
Extruder: 350-380°C
Bed Temp: 120-160°C
Bed Prep: Nano Polymer Adhesive or Polyimide Tape gives us the best results.
Heated Chamber: All high-temp materials print better with a heated enclosure or build environment. Enclosure temp should not exceed 185°C for our high-temp support material to remain structurally sound as a support.
Other: Don’t use a cooling fan while printing this support.
Drying Instructions: 120°C for 4 hours
ULTEM™ is a registered trademark of Sabic Innovative Plastics.


---Authorized 3DXTECH Reseller & Distributor---