• 3ebc78bc14a4e9b83671dfddbc734310
1

3DXTECH

3DXTECH FiberX™ Ultem 1010 + GF30 2.85mm/500g

Regular price
RM 945.50
Sale price
RM 945.50
Regular price
RM 1,575.84
TDS & SDS Available | RF SOLUTIONS ENTERPRISE E-STORE
TDS & SDS Available
Member Discount | RF SOLUTIONS ENTERPRISE E-STORE
Member Discount
Business Bulk Purchase | RF SOLUTIONS ENTERPRISE E-STORE
Business Bulk Purchase
【🔴NOTICES BEFORE PURCHASE🔴】
📌Please contact us for stock availability (latest spool weight and colour)
📌Price listed are estimated and in rough only, please contact us to request for quotation (RFQ).
📌A discounted price will be offered for business / company / bulk purchase.
📌Full Description including product certificates (TDS/SDS/ROHS) & product care instruction refer to our officials websites

👉FibreX™ PEI+GF30 Glass Fiber Reinforced 3D Printing Filament, Made Using ULTEM™ 1010 PEI
We manufacture this ultra-performance 30% glass fiber reinforced 3D printing filament using real ULTEM PEI (polyether imide) resin from Sabic. Filaments made from ULTEM resin offer the ability to create parts with excellent properties at elevated temperatures due to a high glass transition temperature (Tg) of 217°C.

PEI is an amorphous, high-performance polymer which combines excellent thermal properties, exceptional dimensional stability, inherent flame retardancy, and good chemical resistance.

👉Benefits of PEI+GF30 Include:
High thermal properties, with a Tg of 217°C and HDT of 212°C
Inherently flame-resistant
Long-term hydrolytic stability, making it easy to steam and autoclave
Excellent dimensional stability, low heat creep sensitivity, and a very low, uniform coefficient of thermal expansion create highly reproducible part-to-part dimensions
Exceptional strength and stiffness, even at elevated temperatures
Good resistance to a broad range of chemicals, include automotive fluids, fully halogenated hydrocarbons, alcohols, and aqueous solutions
Stable dielectric constant and dissipation factor over a wide range of temperatures and frequencies

👉Filament Specifications:
1.75mm and 2.85mm +/- 0.05mm in diameter

👉Recommended Print Settings:
Extruder: 370-390°C
Bed Temp: 120-160°C
Nozzle: We highly recommend a hardened steel nozzle with a minimum diameter of 0.4mm for abrasive materials such as this
Other: Ideal layer height is 60% of nozzle diameter. We do not recommend printing layers smaller than 0.2mm with abrasive filaments
Bed Prep: Nano Polymer Adhesive gives us the best results
Heated Chamber: Recommended, an enclosure helps reduce warping and improves print success.
Supports: ThermaX™ HTS High-Temp Support is designed to work with complex, high-temp materials just like this
Drying Instructions: 120°C for 4 hours
ULTEM™ is a registered trademark of Sabic Innovative Plastics.
3DXTECH manufactures this PEI+GF30 filament using ULTEM™ PEI resin.


---Authorized 3DXTECH Reseller & Distributor---