3DXTECH FiberX™ PES + GF30 1.75mm/750g

【🔴NOTICES BEFORE PURCHASE🔴】
📌Please contact us for stock availability (latest spool weight and colour)
📌Price listed are estimated and in rough only, please contact us to request for quotation (RFQ).
📌A discounted price will be offered for business / company / bulk purchase.
📌Full Description including product certificates (TDS/SDS/ROHS) & product care instruction refer to our officials websites

👉FibreX™PES+GF30 3D Printing Filament
We formulated FibreX™ PES+GF30 specifically for 3D printing. We hand selected the fiberglass and PES base resin to assure the material prints well and offers optimal performance. This material prints best using a heated build chamber and we highly recommend the use of the Gearbox™ HT2 printer to assure the best layer bonding, strength, and dimensional stability. We see FibreX™ PES+GF30 as an excellent alternative to higher priced materials such as PEI and PEEK.

👉Benefits of FibreX™ PES+GF30:
Exceptional strength and stiffness – even at elevated temperatures up to 220°C
High thermal properties: Tg: 220°C, HDT: 216°C [Higher than Ultem™!]
Inherently flame-retardant – polymer will not sustain ignition
Hydrolytic stability – resistant to steam and repeated autoclave sterilization
Amorphous – Excellent dimensional stability and low shrinkage

👉Filament Specifications:
1.75mm +/- 0.05mm in diameter

👉Recommended Print Settings:
Extruder: 370-390°C
Bed Temp: 140-160°C
Bed Prep: Nano Polymer Adhesive
Heated Chamber: Recommended up to 225°C [A high-temp heated chamber will provide the best environment for the lowest warp and optimal layer bonding. If your printer’s chamber can’t reach 225°C, then raise it as hot as possible to get the best results.]
Supports: ThermaX™ HTS High-Temp Support
Drying Instructions: 150°C for 4+ hours.