3DXTECH
3DXTECH CarbonX™ Ultem 9085 + CF10 1.75mm/500g
- Regular price
- RM 1,034.21
- Sale price
- RM 1,034.21
- Regular price
-
RM 1,723.68
TDS & SDS Available
Member Discount
Business Bulk Purchase
Share
【🔴NOTICES BEFORE PURCHASE🔴】
📌Please contact us for stock availability (latest spool weight and colour)
📌Price listed are estimated and in rough only, please contact us to request for quotation (RFQ).
📌A discounted price will be offered for business / company / bulk purchase.
📌Full Description including product certificates (TDS/SDS/ROHS) & product care instruction refer to our officials websites
CarbonX™ PEI+CF [Aerospace] Made Using ULTEM 9085 Printing Filament
CarbonX™ CF PEI 9085 Aerospace is made using Sabic Ultem™ 9085 resin and 10% certified Toray T800 chopped carbon fiber. This custom formulation is an excellent printing aerospace-grade material specifically formulated for our aerospace clients.
Ultem™ 9085 is FAA-approved for FST applications (Flame/Smoke/Toxicity) and meets FAR 25.853 and OSU 65/65 standards. Toray T800 carbon fiber has a 5µm diameter (vs. 7µm for standard carbon fiber) and allows for more fibers per cc3 of material than when using standard carbon fiber. This allows for superior strength and stiffness while maintaining excellent dimensional stability and printability.
Benefits of Ultem™ PEI+CF [Aerospace] Include:
High thermal properties, Tg of 186°C and an HDT of 165°C
Inherent flame resistance due to Ultem™ 9085 base resin
Improved stiffness and strength for structural applications
Excellent dimensional stability – lower CTE, warp, and shrinkage vs unfilled grades
Resistance to a broad range of chemicals, include automotive fluids, fully halogenated hydrocarbons, alcohols, and aqueous solutions
Typical Applications of PEI+CF Ultem 9085:
Aerospace:
Automotive & Transportation:
Electronics:
👉Filament Specifications:
1.75mm and 2.85mm +/- 0.05mm in diameter
👉Recommended Print Settings:
Extruder: 365-390°C
Bed Temp: 140-160°C
Bed Prep: Nano Polymer Adhesive, 3DXTECH Polyimide Tape, or Ultem PEI tape gives us the best results
Other: No cooling fan with print speeds of 16mm/s as a starting point
Heated Chamber: Recommended, a chamber helps reduce warping and improves layer adhesion, up to 180°C if equipped
Supports: ThermaX HTS High-Temp Support works ideal for complex, high-temp materials just like this.
Drying Instructions: 140°C for 4 hours.
---Authorized 3DXTECH Reseller & Distributor---
📌Please contact us for stock availability (latest spool weight and colour)
📌Price listed are estimated and in rough only, please contact us to request for quotation (RFQ).
📌A discounted price will be offered for business / company / bulk purchase.
📌Full Description including product certificates (TDS/SDS/ROHS) & product care instruction refer to our officials websites
CarbonX™ PEI+CF [Aerospace] Made Using ULTEM 9085 Printing Filament
CarbonX™ CF PEI 9085 Aerospace is made using Sabic Ultem™ 9085 resin and 10% certified Toray T800 chopped carbon fiber. This custom formulation is an excellent printing aerospace-grade material specifically formulated for our aerospace clients.
Ultem™ 9085 is FAA-approved for FST applications (Flame/Smoke/Toxicity) and meets FAR 25.853 and OSU 65/65 standards. Toray T800 carbon fiber has a 5µm diameter (vs. 7µm for standard carbon fiber) and allows for more fibers per cc3 of material than when using standard carbon fiber. This allows for superior strength and stiffness while maintaining excellent dimensional stability and printability.
Benefits of Ultem™ PEI+CF [Aerospace] Include:
High thermal properties, Tg of 186°C and an HDT of 165°C
Inherent flame resistance due to Ultem™ 9085 base resin
Improved stiffness and strength for structural applications
Excellent dimensional stability – lower CTE, warp, and shrinkage vs unfilled grades
Resistance to a broad range of chemicals, include automotive fluids, fully halogenated hydrocarbons, alcohols, and aqueous solutions
Typical Applications of PEI+CF Ultem 9085:
Aerospace:
Automotive & Transportation:
Electronics:
👉Filament Specifications:
1.75mm and 2.85mm +/- 0.05mm in diameter
👉Recommended Print Settings:
Extruder: 365-390°C
Bed Temp: 140-160°C
Bed Prep: Nano Polymer Adhesive, 3DXTECH Polyimide Tape, or Ultem PEI tape gives us the best results
Other: No cooling fan with print speeds of 16mm/s as a starting point
Heated Chamber: Recommended, a chamber helps reduce warping and improves layer adhesion, up to 180°C if equipped
Supports: ThermaX HTS High-Temp Support works ideal for complex, high-temp materials just like this.
Drying Instructions: 140°C for 4 hours.
---Authorized 3DXTECH Reseller & Distributor---