3DXTECH 3DXMAX® ASA 1.75mm/1kg

Notice

【🔴NOTICES BEFORE PURCHASE🔴】

📌Please contact us for stock availability (latest spool weight and colour)

📌Price listed are estimated and in rough only, please contact us to request for quotation (RFQ).

📌A dibusiness / company / bulk purchase.
📌Full Description including product certificates (TDS/SDS/ROHS) & product care instruction refer to our officials websites

👉3DXMAX® ASA
3DXMAX® ASA (Acrylonitirle Styrene Acrylate) is a UV-resistant, famously weatherable polymer. Our ASA has a low-gloss matte finish which makes it the perfect filament for technical-looking prints, especially when you don’t want the high-gloss surface finish often associated with 3D printing materials like ABS, PETG, or PLA.

👉Benefits of 3DXMAX® ASA:
Excellent mechanical and thermal properties (Tg of 105°C)
Highly resistant to ultra-violet radiation and sunlight
Sturdy and rugged against the weather, ideal for an outdoor part
Easier to print than most industrial-grade materials
Variety of colors and beautiful, low-gloss finish to make your models pop!

👉ASA is the Material for Outdoor Use:
ASA’s UV-stability makes it an ideal material for outdoor applications which experience intense exposure to the sun and elements. ASA’s exceptional mechanical and thermal properties – coupled with excellent UV-stability – is why this resin is used in the Auto, Marine, and RV industries.

👉Typical ASA Applications Include:
Mirror Housings, Cowl Covers, Radiator Grills, & Sensor Housings

👉Filament Specifications:
1.75mm and 2.85mm +/- 0.05mm in diameter

👉Recommended Print Settings:
Extruder: 235-255°C
Bed Temp: 90-110°C
Other: Lower the bed temp down by about 10-20°C after the first few layers. The use of a fan at up to 50% may be needed for printers without enclosed and heated chambers.
Bed Prep: Vision Miner Nano Adhesive and 3DXTECH Polyimide Tape work best for us.
Heated Chamber: Recommended, a chamber helps reduce warping.
Supports: Water soluble AquaTek X1 USM works great for complex parts.
Drying Instructions: 80°C for 4 hours.