ESD Fiberlogy filament was created to protect electronic components which are sensitive to electrostatic discharges. The material has high dissipation and antistatic properties with respect to energy coming from discharges, and so it is able to prevent damage or significantly reduce the risk of damage to your electronic devices.
The destructive nature of electrostatic discharge leads to the generation of high costs related to the maintenance, repair and replacement of vulnerable components that companies have to bear, especially those which produce and use electronics in conditions that are conducive to the occurrence of the ESD effect. The task of ESD from Fiberlogy is to eliminate this threat. Therefore, the ESD filament will come in handy when printing housings for integrated circuits, sensors, connectors, measuring devices.
APPLICATION:
* ELECTRONICS: housings, covers, cases, screens products equipped with diodes, connectors
* TOOLS OR THEIR PARTS: tools for working with electronics, tools for making electronic components
* PARTS AND TRANSMISSION TOOLS: machine components, elements of equipment for employees and manufacturing plants
Properties:
- high resistance to electrostatic discharge
- mechanically strong and resistant to chemicals
- easy to print – does not require a heated chamber
- low moisture absorption
How to print?
The following parameters are only suggested print settings for this material. To ensure the best print quality, it is necessary to choose the appropriate settings for a specific printer and printing conditions.
Nozzle Temperature
250-265°C
Bed Temperature
85°C
Closed chamber
not required
Fan
0-25%
Flowrate
95-105%
Printing Speed
< 100 mm/s
Surface
masking tape
Retraction (direct)
1-2 mm
Retraction (bowden)
4-6 mm
Retraction Speed
20-45 mm/s
Drying conditions
60°C / 4h
Notes
Due to the strong adhesion to the bed, it is not recommended to print directly on its surface or on glass. This can lead to damage. We recommend using a masking tape.Due to the content of carbon nanoparticles, the minimum recommended nozzle diameter is 0.5 mm.
===Authorozed Fiberlogy Reseller Malaysia===