3DXTECH
3DXTECH FluorX™ PVDF 1.75mm/750g
- Regular price
- RM 1,012.03
- Sale price
- RM 1,012.03
- Regular price
-
RM 1,686.72
TDS & SDS Available
Member Discount
Business Bulk Purchase
Share
【🔴NOTICES BEFORE PURCHASE🔴】
📌Please contact us for stock availability (latest spool weight and colour)
📌Price listed are estimated and in rough only, please contact us to request for quotation (RFQ).
📌A discounted price will be offered for business / company / bulk purchase.
📌Full Description including product certificates (TDS/SDS/ROHS) & product care instruction refer to our officials websites
👉FluorX™ PVDF 3D Filament
PVDF [Polyvinylidene fluoride] is a high-performance polymer which offers exceptional thermal and chemical resistances.
Rated for uses up to 130°C – this filament can be used in demanding applications under the most extreme conditions. PVDF is resistant to most chemicals and solvents, making it a great fit for applications which will be exposed to harsh environments.
👉Benefits of PVDF Include:
High Thermal Properties: 130°C CUT
Excellent resistance to a broad range of chemicals, such as automotive fluids, oils, gas, lubricants, fully halogenated hydrocarbons, alcohols, acids, and bases
Non-hygroscopic, does not absorb moisture. No drying needed!
Inherently UV-resistant with very stable H-F bonds.
Low smoke and flame characteristics with a base resin rated V-0
Long-term hydrolytic stability
Resistant to nuclear radiation
Very good abrasion resistance – similar to Nylon and UHMW-PE for high-wear applications
👉Filament Specifications:
1.75mm and 2.85mm +/- 0.05mm in diameter
👉Recommended Print Settings:
Extruder: Between 245 and 265°C depending on your printer. Some need to get as high as 280°C.
Platform Temp: 90 – 110°C
Bed Prep: Nano Polymer Adhesive gives us the best results.
Other: No or slow cooling fan. Print with speeds of 40-60mm/s as a good starting point.
Drying Instructions: PVDF doesn’t absorb moisture, and doesn’t need drying!
Safety note: This polymer starts to degrade and break down at temps above 290°C. Please keep your extruder temperature below that point to avoid degradation, offgassing, and mechanical property loss.
FluorX™ PVDF is made using Arkema Kynar® PVDF
Kynar® is a registered trademark of Arkema.
📌Please contact us for stock availability (latest spool weight and colour)
📌Price listed are estimated and in rough only, please contact us to request for quotation (RFQ).
📌A discounted price will be offered for business / company / bulk purchase.
📌Full Description including product certificates (TDS/SDS/ROHS) & product care instruction refer to our officials websites
👉FluorX™ PVDF 3D Filament
PVDF [Polyvinylidene fluoride] is a high-performance polymer which offers exceptional thermal and chemical resistances.
Rated for uses up to 130°C – this filament can be used in demanding applications under the most extreme conditions. PVDF is resistant to most chemicals and solvents, making it a great fit for applications which will be exposed to harsh environments.
👉Benefits of PVDF Include:
High Thermal Properties: 130°C CUT
Excellent resistance to a broad range of chemicals, such as automotive fluids, oils, gas, lubricants, fully halogenated hydrocarbons, alcohols, acids, and bases
Non-hygroscopic, does not absorb moisture. No drying needed!
Inherently UV-resistant with very stable H-F bonds.
Low smoke and flame characteristics with a base resin rated V-0
Long-term hydrolytic stability
Resistant to nuclear radiation
Very good abrasion resistance – similar to Nylon and UHMW-PE for high-wear applications
👉Filament Specifications:
1.75mm and 2.85mm +/- 0.05mm in diameter
👉Recommended Print Settings:
Extruder: Between 245 and 265°C depending on your printer. Some need to get as high as 280°C.
Platform Temp: 90 – 110°C
Bed Prep: Nano Polymer Adhesive gives us the best results.
Other: No or slow cooling fan. Print with speeds of 40-60mm/s as a good starting point.
Drying Instructions: PVDF doesn’t absorb moisture, and doesn’t need drying!
Safety note: This polymer starts to degrade and break down at temps above 290°C. Please keep your extruder temperature below that point to avoid degradation, offgassing, and mechanical property loss.
FluorX™ PVDF is made using Arkema Kynar® PVDF
Kynar® is a registered trademark of Arkema.